6“ 3 Point Hydraulic Feeding PTO Wood Chipper for 20-50HP Tractor, WC68H

Required PTO HP
20 – 50HP
Flywheel Thickness
0.75in
Chipping Diameter
6in
Flywheel Housing System
Easy To Open Clamshell
In-feed Chute Opening
25.6 x 25.2 in 
Flywheel Housing Thickness
0.3in 
In-feed Opening
6 x 8in 
Flywheel Shaft
2in
In-feed Chute
Quick folding for transport/storage
Hydraulic Oil
5.3 gal of ISO 32 or ISO 46 (warmer climates)
In-feed System
Self Contained Hydraulic System
Hydraulic Pump
Yes – Belt Driven
In-feed Drive
Forward/Neutral/Reverse with Variable Speed: (0-75 ft/min)
Discharge Chute
360 Degree Swivel
In-feed Roller Size
8in Chisel Tooth
PTO Shaft
Shear Pin Protected PTO Shaft Included
In-feed Roller Pressure
Adjustable via Spring Tension
PTO Shaft Length
T4/31.1-38.3 in
Quick Hitch Compatible
Cat 1 Quick Hitch
Number of Blades
4 Reversible Blades
Spline End
1 3/8″Z6
Finish
Powder Coat Paint
3 Point Hitch
CAT1 
Warranty
1 Year
Flywheel Speed
540 RPM
Dimensions (L x W x H) 
45x33x45 in 
Flywheel Drive System
Direct Drive
Net Weight
695 lbs
Flywheel Diameter
24in
Gross Weight
882 lbs  
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.