60″ Standard 3Point Offset Flail Ditch Bank Mower, 25-60HP, VAM60

Engine Power Required
25-60 hp
Rotor Shaft Speed
2356 rpm
Working Width
60in
Hydraulic Fittings Size
G1/2 in
Overall Width
64in
Hydraulic Hoses Quantity
4
Ground Clearance (Two Gears)
0.5-0.6in
Drive Type
Belt Drive
Max. Cutting Diameter
Depends On The Type Of Grass
Spline End
1.375in  Z6
Offset Distance from The Center (Maximum)
77in
Driveline Shaft Length
T6-LF-63  With Shear Bolt ; 63in-77in [05B-1600]
Tilt-Up Angle
90°
PTO Shaft Speed
540 rpm
Tilt-Down Angle
60°
3-Point Hitch
CAT 1
Number Of Blades
24
Deck Thickness
0.16in
Blade Type
Hammer
Side Plate Thickness
0.25in
Size of Blades
3.5 x 3.2 x 1.6in
Number of Belts
3
Blade Weight
0.9 lbs
Belt Size
V Belt 17×991
Blade （Tines）Material
Cast Steel
Gearbox 0il Type
85W-90
Rotor Bearing
SKF Bearing
Dimensions (L x W x H)
64 x 27.5 x 28in
Rotor Diameter
4.3in
Finsh 
Powder Coating
Blade Swing Diameter
14in
Warranty
1 Year
Rotor Thickness
0.3in
Weight (N.W./G.W.)
657/772 lbs
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.