14″ x 40″ Industrial Metal Lathe Machine with Variable Speed DRO Gunsmith Gearhead Precision Turning Drilling Belt Drive 1440GV

Specification
Specification Value
Swing Over Bed
14 in (356 mm)
Swing Over Cross Slide
8-13/16 in (224 mm)
Swing Over Gap
19-3/4 in (502 mm)
Distance Between Centers
40 in (1016 mm)
Bed Width
7.38 in (187 mm)
Spindle Bore
2 in (51 mm)
Spindle Mount
D1-5 Camlock
Spindle Taper
MT6
Tailstock Taper
MT4
Tailstock Quill Diameter
1.26 in (32 mm)
Tailstock Quill Travel
4 in (102 mm)
Cross Slide Travel
6-11/16 in (170 mm)
Compound Rest Travel
3 in
Motor Power
3 HP
Motor Type
AC Motor with Variable Frequency Drive
Drive Type
Belt Drive
Voltage
220V
Phase
1-Phase
Frequency
60 Hz
Amperage
20 A
Speed Adjustment
Infinitely Variable
Spindle Speed Range
40 – 1800 RPM
Longitudinal Feed Rate
0.002 – 0.046 in/rev (IPR)
Cross Feed Rate
0.0007 – 0.0187 in/rev (IPR)
Inch Threads
4 – 56 TPI
Metric Threads
0.4 – 7.0 mm pitch
Machine Footprint (W × D)
72 × 24 in (1829 × 610 mm)
Overall Dimensions (L × W × H)
76 × 30 × 60 in (1930 × 762 × 1524 mm)
Net Weight
1800 lb (816 kg)
Shipping Dimensions
78 × 48 × 72 in (1981 × 1219 × 1829 mm)
Shipping Weight
1900 lb (861 kg)
Liftgate Compatible
Yes
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.