1.5 HP 10” x 30” Combination Lathe Milling Drilling Machine, 1.5” Spindle Bore, 0-2000 RPM Variable Speed, High Precision Benchtop Lathe for…

Lathe Parameter
Motor Power (Lathe)
1.5 HP, 110V, single-phase, 10A
Swing Over Bed
9-7/8″ (250 mm)
Swing Over Cross Slide
5-1/2″ (140 mm)
Swing Over Saddle
5″ (127 mm)
Distance Between Centers
29-1/2″ (750 mm)
Bed Width
5-3/8″ (135mm)
Spindle Bore
1-1/2″ (38 mm)
Spindle Mount
Intrinsic back plate
Spindle Taper
MT#5
Tailstock Taper
MT#2
Tailstock Quill Travel
3″ (75 mm)
Tailstock Offset
Carriage Travel
27-1/2″ (700 mm)
Cross Slide Travel
5″ (127 mm)
Compound Slide Travel
3″ (75 mm)
Spindle Speed Range
0–2000 RPM
Number of Speed Ranges
Variable
Longitudinal Feed Rate
0.0025 – 0.014 in./rev.
Transverse Feed Rate
0.0014 – 0.004 in./rev.
Leadscrew Size & Pitch
20mm(8TPI)
Threading Capacity – Inch
8–80 TPI(37KINDS)
Threading Capacity – Metric
0.35 – 3.0 mm(21kinds)
Thread Dial Indicator
YES
Tool Post Type
4-way
Max Tool Bit Size
15/32”(12mm)
Mill/Drill Head Specifications
Motor Power (Mill Head)
1HP(750W)
Spindle Taper
R8
Spindle Speed Range
0-2500RPM
Spindle Travel (Quill Stroke)
2″(50mm)
Quill Diameter
Ø60 mm
Drawbar Thread Size
7/16″-20
Drilling Capacity
5/8″(16mm)
End Milling Capacity
1/2″(12mm)
Face Milling Capacity
2″(50mm)
Vertical Travel (Z-Axis)
10-7/8″(275mm)
Head Tilt Angle
±90°
Distance: Spindle to Table
10-7/8″(275mm)
Distance: Spindle to Column
6-5/8″(170mm)
Column Type
Dovetail Slot
Drive Type
Belt Drive Brushless
Machine Dimensions & Utilities
Electrical Requirements
110V 1PHASE
Overall Dimensions
52”x26”x38-1/4”(1320x660x970mm)
Net / Gross Weight
440/517lbs(200/235kg)
Shipping Dimensions
56”x27”x39”（1420x680x970mm）
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.